Apply
For plumbing & heating businesses

Plumbing & Heating Business Profit Margins: 5 Steps to Keep More

Sviat Jay
Sviat JayFounder of BizMentor & Craftex. Updated , 5 min read
Craftex operative on a live London project

The short answer

Plumbing and heating is kit-heavy and call-out heavy. Price boilers on margin not markup, make every call-out cover its travel, and build a servicing book that pays every 12 months.

  1. Margin, not markup, on kit. A 30% markup on a £2,416 boiler job gives a 23% margin — about £311 less than pricing to a 30% margin.
  2. Call-outs carry travel. One hour on site plus 45 minutes getting there is 1.75 paid hours: about £48 of cost and £69 of price at a 30% floor.
  3. Landlord servicing is a book, not a job. Landlords must have gas appliances checked every 12 months, so build a renewal list.
  4. Heat pumps tie up cash. The £7,500 Boiler Upgrade Scheme grant is claimed by the MCS installer, so you fund that share until the voucher is paid.

A plumbing business profit margin in the UK is lost in three places. Kit is priced on markup, call-outs don't cover travel, and heat pump cash waits on grants. This page shows how to fix all three. Want your numbers checked? Book a free strategy call.

How a plumbing and heating business makes its money

Plumbing and heating has two very different kinds of work under one name:

  • Installs — boilers, cylinders, bathrooms, heat pumps. Big tickets, a lot of kit, long jobs.
  • Service work — breakdowns, servicing and landlord safety checks. Small tickets, a lot of travel, many visits.

Installs lose margin through how kit is priced. Service work loses it through travel and minimum charges nobody set. Gas Safe registration, insurance and vans sit in overheads for both. (If full bathroom refits are a big part of your work, see how bathroom fitting businesses price refits.)

1Step 1 of 5

Price boilers and kit on margin, not markup

On a kit-heavy job, the difference between markup and margin is real money.

Worked example: combi boiler replacement (example figures)

Item £
Labour: 17 hours (strip-out, install, commissioning) × £27.40 465.80
Boiler, flue and filter 1,800.00
Fittings and consumables 150.00
Direct cost 2,415.80
30% markup (cost × 1.30) 3,140.54 → 23% margin
30% margin (cost ÷ 0.70) 3,451

Same job, about £311 apart. If you fit 40 a year, that gap is over £12,000. Want your kit margin set from your own jobs? Book a free strategy call.

The £27.40 is the true hourly cost of an employee on £18 an hour. It counts employer NI, pension and 5.6 weeks' holiday, and takes travel time out.

Finished office kitchen and breakout with high table, glass partition and pendants, Beaumont House
Office kitchen and breakout delivered by Craftex at Beaumont House. Plumbing is one package on a job like this.
From Sviat

Which number is costing you most? Take the free 4-minute Construction Business Scorecard: 18 questions on your pipeline, sales, pricing, cash flow and systems, with your weakest area shown first. Need prices built for you? See our estimating service.

2Step 2 of 5

Make every call-out pay for its travel

A one-hour breakdown is never one hour. Count everything the visit takes:

  • travel there and back
  • parking and finding the property
  • collecting parts from the merchant
  • writing up the job

Example: 1 hour on site plus 45 minutes of travel = 1.75 paid hours × £27.40 = about £48 of cost. At a 30% floor, that visit must sell for about £69 before parts. A £60 call-out with "first hour included" loses money before the van is even counted.

Set a minimum charge, then bill further time in fixed blocks. Quote parts with your margin on top.

If your call-outs come through a lead platform, count its cost per won job too. We work the numbers through for Checkatrade and MyBuilder.

Free 1-on-1 call

Want your call-out and install prices checked against your real costs?

Book a free call.

3Step 3 of 5

Build a landlord servicing book

Landlords must have every gas appliance and flue checked by a Gas Safe registered engineer at least every 12 months. They must give tenants a copy of the record within 28 days. That makes landlord work repeat work by law.

Aerial view of a tree-lined London avenue
  • Keep a renewal list by month, not a pile of old certificates.
  • Contact each landlord before the 12 months run out, with the date and the price.
  • Group visits by postcode so travel stays low.
  • Quote remedials separately and get approval before doing them.

In our example job-costing, the service and CP12 line earned 38% against a 35% target, while the boiler install fell to 19%. Small, repeatable work often protects the year.

The same logic scales up: housing associations and managing agents tender gas servicing as contracts. See how to get commercial plumbing and heating contracts.

Cover of UK Plumbing & Heating Profitability Playbook
Free guide, 14 pages

UK Plumbing & Heating Profitability Playbook

Get the free guide
4Step 4 of 5

Plan the cash on heat pump installs

Heat pumps change the cash picture:

  • The grant comes through you. The Boiler Upgrade Scheme pays £7,500 for an air source or ground source heat pump in England and Wales. It is installer-led: an MCS certified installer applies for and redeems the voucher.
  • You carry that £7,500 until the voucher is paid. Agree a deposit on the client's share and order kit only once it is paid.
  • VAT is zero on installing heat pumps and heating controls in homes until 31 March 2027, then 5%. A new efficient boiler is standard-rated. Say which rate applies on every quote.
Mistake to avoid

Pricing a heat pump like a boiler swap. Survey, heat-loss design, MCS paperwork and the grant claim are hours — put them on the quote.

He'll never work on the tools again
5Step 5 of 5

Charge for upgrades and commissioning time

Typical plumbing and heating variations:

  • the client upgrades the boiler or cylinder after you have quoted
  • extra radiators, or pipework moved once the floors are up
  • a flue route or gas supply that doesn't meet regulations and needs extra work
  • the bathroom fitter changes the layout after first fix

Price each one the same day and get a written yes before you do it.

From Sviat

Commissioning, benchmark paperwork and notifications take time on every install. Price them in, every time.

Then job-cost every install: budgeted vs actual hours split by strip-out, first fix, install and commissioning, and gross profit per hour.

Real result

Dmitriy, plumber: his first £50K commercial project

Read the case

He started presenting quotes live and following up every open quote weekly. Individual results, not typical or guaranteed.

The UK Plumbing & Heating Profitability Playbook guide cover

Get the free PDF guide

14 pages. Sent to your inbox in 2 minutes.

Free 1-on-1 call

Want a pricing and follow-up routine like Dmitriy's for your plumbing firm?

Book a free strategy call.

Before you send your next plumbing or heating quote

Regulatory, grant and tax points are general information as of October 2026. Check the details with Ofgem, your registration body and your accountant.

Checklist

Before you go

  • Kit is priced to a margin (cost ÷ 0.70), not a markup
  • Commissioning, paperwork and notification are on the quote
  • Call-outs include travel and have a minimum charge
  • Heat pump quotes show the grant, the deposit and the VAT rate
  • Landlord renewals are listed by month
FAQ

Frequently asked questions

What is a good profit margin for a plumbing and heating business?

Set it from your own accounts. Overheads as a % of turnover plus the net profit you want gives your minimum gross margin; with 20% overheads and a 10% target, nothing goes out below 30%. Check it separately for installs, servicing and bathrooms.

Should plumbers use markup or margin when pricing boilers?

Price to a margin. Margin is a share of the selling price, so for a 30% margin divide cost by 0.70. Adding 30% to cost only gives a 23% margin, and on kit-heavy jobs that gap is hundreds of pounds.

How do I price plumbing call-outs?

Cost the whole visit, including travel, parking and the time to pick up parts, at your true hourly rate. Set a minimum charge that covers that plus your margin, and charge further time in fixed blocks.

Who applies for the Boiler Upgrade Scheme grant?

The installer. The scheme is installer-led: the property owner goes through an MCS certified installer, who applies for and redeems the voucher, worth £7,500 for an air source or ground source heat pump in England and Wales.

How often do landlords need a gas safety check?

Every 12 months. Each appliance and flue must be checked within 12 months of installation and then at intervals of no more than 12 months, by a Gas Safe registered engineer, and tenants get a copy of the record within 28 days.

Free strategy call

Price every boiler and call-out for real profit

Book a free strategy call. We go through your last three installs and call-outs and show where the margin went.

Takes 2 minutes to apply.