Apply
For electrical contractors

How to Price Electrical Jobs: A Guide for UK Electrical Contractors

Sviat Jay
Sviat JayFounder of BizMentor & Craftex. Updated , 7 min read
Electrician in a hi-vis jacket working on a distribution board

The short answer

Price an electrical job from the hours it really takes, including survey, testing, certificates and notification, costed at your true hourly rate, plus materials and travel, then divide by (1 − your margin floor). Use a per-point rate to check the price, never to make it.

  1. A socket rate is not a price. In our kitchen example the job works out at about £102 a point, against a typical £65 per socket, because of the new circuit, testing and notification.
  2. Hours × true hourly cost. Not the wage you pay: with NI, pension and holiday, our example rate is £27.40 an hour.
  3. Markup is not margin. A 20% markup on materials earns only 16.7% margin. To hold a 30% margin you need a 42.9% markup.
  4. Price the call-out from cost. Travel, the first hour and the admin come to about £95 minimum in our example, before you open a single back box.

Most electricians price the way they learned on site: so much a socket, so much a light, "about £400 a day". Then the kitchen needs its own circuit and the board has no spare ways. The fitter moves the island after first fix. Testing and the certificate take a whole afternoon you never charged for.

This guide shows how to price electrical jobs so every quote makes money. It is for owners of UK electrical businesses. Want your rates checked against a real job? Book a free strategy call.

For setting your margin floor and budgeting each type of work, see our electrical profit margin guide. This page is about pricing the job in front of you.

Why a rate per socket loses money

Homeowner cost guides are a useful market check. Checkatrade's 2026 guide puts a new socket at about £55–£75 (average £65). It puts an electrician at about £50–£55 an hour and a day at around £400–£500. But a "point" means very different work:

  • A spur off an existing ring in an empty room: quick, low risk
  • A point on a new circuit Cable run, new way in the board, notifiable
  • Points in a lived-in house Lifting floors, chasing, making good, dust sheets
  • Points in a bathroom or kitchen Special locations, RCD checks, more testing
  • Commercial points Containment, drawings, O&M manuals, longer payment

Quote them all at one rate and you win the easy jobs and lose money on the hard ones.

1Step 1 of 5

Know your numbers before you price anything

You need two numbers from your own books:

  1. True hourly cost. Wages plus employer NI, pension, holiday, van, tools, test kit calibration and insurance, divided by the hours you can actually charge. In our example that is £27.40 an hour for an employee on £18.
  2. Margin floor. Your overheads as a % of turnover plus the net profit you want. With 20% overheads and 10% profit, nothing goes out below a 30% gross margin.

Every price on this page is cost ÷ (1 − margin floor). At 30%, that is cost ÷ 0.7. The margin guide shows how to work out both numbers.

Clamp meter, pliers and coiled cables laid out for an electrical job
Your price starts with two numbers: your true hourly cost and your margin floor.
2Step 2 of 5

Markup on materials: the maths most electricians get wrong

"I put 20% on materials" sounds safe. It is not 20% profit. Markup is added to cost; margin is the share of the price you keep:

Markup on cost Margin you keep
20% 16.7%
25% 20%
42.9% 30%
53.8% 35%

To convert: markup = margin ÷ (1 − margin). If your floor is 30%, a 20% markup on materials pulls the whole job below it.

The simplest fix is not to mark up materials separately at all. Add labour, materials and travel at cost, then divide the total by 0.7. The client sees one clear price, and every part of the job carries your margin.

Mistake to avoid

Letting the client buy the fittings "to save money" and keeping your labour price the same. Your labour now has to carry the whole margin, and you carry the risk if their fittings are wrong.

3Step 3 of 5

Survey and price every stage of the job

Never price a rewire or a kitchen from a photo. On the visit, check the board: age, spare ways and RCD protection. Check the earthing and bonding, cable routes, what is under the floors and who lives in the house.

Then price the hours stage by stage:

Electrician in hi-vis testing an open consumer unit with a multimeter
Testing and the certificate are hours on the job, so they are hours on the quote.
  • survey, quote and design time
  • first fix: routes, chasing, back boxes, cable runs
  • second fix: accessories, fittings, connections at the board
  • testing, inspection and the certificate
  • notification and admin for notifiable work

New circuits, consumer unit replacements and work in rooms with a bath or shower are notifiable in England. A scheme-registered electrician self-certifies; anyone else notifies building control before starting. That is time and a scheme fee on every such job.

From Sviat

Testing, certificates and Part P notification take real time on every job. Price them as a line, not as a favour.

Free 1-on-1 call

Not sure your hourly cost and margin floor are right?

Book a free strategy call and we will check them with you.

4Step 4 of 5

A worked example: a new kitchen circuit and 15 points

Kitchen in a lived-in house (example figures). 8 double sockets on a new circuit, a new cooker circuit, 6 downlights. The board has spare ways.

Stage Hours Cost £
Survey, design, quote 1 27.40
First fix 11 301.40
Second fix 6 164.40
Testing and certificate 3 82.20
Notification and admin 1 27.40
Labour at £27.40/h 22 602.80

Then add what is not labour:

£430materials at cost: cable, back boxes, accessories, downlights, MCBs/RCBOs
£40travel and parking
15points on the job

Direct cost: £1,072.80. At a 30% floor the price is £1,072.80 ÷ 0.7 = £1,533, quoted as £1,535. Add VAT if you are registered, and your scheme's notification fee as its own line. That is about £102 per point.

Now the check. At the £65 average socket rate you would quote £975. That is £97.80 less than it costs you, before a penny of overheads. The rate looked "market". The job was not a spur.

Cover of UK Electrical Profitability Playbook
Free guide, 14 pages

UK Electrical Profitability Playbook

Work out your true hourly cost and margin floor, then job-cost every rewire, board change and EICR.

Get the free guide

Call-outs, day rates and fixed prices

Use each method where it fits, and build all three from the same hourly cost:

Box of cable connectors and heat-shrink sleeves
Small jobs still use a van, a morning and a certificate.
Method Use it for How to set it
Fixed price per jobHomeowners, rewires, kitchens, boardsStage hours × cost + materials, ÷ (1 − floor)
Minimum / call-out chargeFaults, small jobs, one socketTravel + first hour + admin. Our example: about £95
Day rateDayworks, unknown scope, labour for a builder8 h × £27.40 = £219, ÷ 0.7 = about £313 minimum

The call-out in our example is 45 minutes there and back, an hour on the job and 15 minutes of admin. That is 2 hours × £27.40 = £54.80, plus £10 for the van: £64.80 cost and about £95 price.

Checkatrade's guide gives a London example of £100 for the first hour, so the market will pay it. Below that, every small job is a donation.

If the market pays £400–£500 a day and your floor is £313, the gap is your profit. If you cannot get your floor, the answer is different clients or lower costs, not a lower price.

5Step 5 of 5

Price for the client, not just the circuit

The same 15 points are a different job for different clients:

  • Homeowner. Lived-in house, more making good, more questions. Take a deposit for materials and get paid on completion, the same day.
  • Landlord or letting agent. Private landlords must have the installation checked at least every five years, so EICRs come in volume. Price by circuits and hours, and agree remedial work rates in writing before you test.
  • Builder or main contractor. CIS takes 20% of your labour if you are registered, or 30% if not, unless you have gross payment status. The VAT domestic reverse charge may apply, and retention is often held. Build the wait into your price and your cash plan. See how to win commercial electrical contracts.

If you are close to £90,000 of taxable turnover in a 12-month period, you must register for VAT. Price with it in mind before you reach it.

For a four-minute score of your pricing, cash, sales and systems, take the free Construction Business Scorecard.

Write a quote that protects your margin

A quote is not a number on a WhatsApp message. Put in writing:

  • Scope. Points, circuits and fittings by room, and who supplies the fittings
  • Compliance. Testing, the certificate and notification, each as a line
  • Exclusions. Making good, decorating, faults found on existing circuits
  • Payment. Deposit, stages or completion, and the date it is due
  • Changes. Layout locked at first fix; moves after that are priced and agreed in writing

When the kitchen fitter moves the island, price the change there and then. See how to get paid for variations for how to do it without an argument.

What this looks like in practice. Dima, an electrician in our mentorship, put pricing and job-costing in place. Within about four weeks he took on around 10 people and was earning around £7–8K a month. His story is on Sviat's Russian-language YouTube channel. Individual results, not typical or guaranteed.

The order he did it in is in our guide on how to grow an electrical business.

Sviat Jay runs a working construction company, Craftex, and mentors owners one to one himself. Every electrical business is different: one owner is strong on the tools, another on sales. Working one to one, he builds on what you are already good at.

He is aiming for results in about 4 months rather than 1–3-year programs. To price your next job with us, book a free strategy call.

Electrician fitting an electrical box with a drill
Lock the layout before first fix; every move after it is an extra.
Free 1-on-1 call

Want your electrical prices built from your own numbers?

Book a free strategy call.

Before you send your next electrical quote

Tax and compliance points are general information as of October 2026. Check the details with your accountant and your competent person scheme.

Checklist

Before you go

  • You surveyed the board, earthing, routes and the house
  • Hours are estimated stage by stage, testing and admin included
  • Labour is costed at your true hourly cost, not the wage
  • Materials and travel are in at cost, and the price is cost ÷ (1 − floor)
  • Scope, exclusions, payment and the first-fix lock are in writing
FAQ

Frequently asked questions

How do you price an electrical job?

Survey the job, estimate the hours for each stage (survey, first fix, second fix, testing and certification, notification and admin), multiply by your true hourly cost, add materials at cost and travel, then divide by (1 − your margin floor). Divide by the number of points to check the rate against the market.

How much should an electrician charge per point in the UK?

Work it out from your own hours and costs. Checkatrade's 2026 cost guide puts a new socket at about £55–£75, average £65, but that is for a simple addition. In our kitchen example with a new circuit, testing and notification, the job came out at about £102 a point.

How much markup should an electrician put on materials?

Decide the margin you need first, then convert it: markup = margin ÷ (1 − margin). A 30% margin floor means a 42.9% markup. The simplest way is to price the whole job, labour and materials together, at cost ÷ (1 − margin floor).

Should electricians charge a call-out fee?

Yes, or a minimum charge. A small job still costs you travel, parking, the first hour and the paperwork. In our example that minimum is about £95. Checkatrade's guide gives a London example of £100 for the first hour.

What is a fair electrician day rate in the UK?

Your minimum is your own cost: in our example, 8 chargeable hours at £27.40 is £219, which at a 30% margin floor must sell for about £313 before materials. Checkatrade's 2026 guide puts the market at around £400–£500 a day.

Free strategy call

Price every electrical job at a margin worth getting up for

Book a free strategy call. We look at your rates, your last three jobs and your clients, and what to fix first.

Takes 2 minutes to apply.